25
Instruments, Features and Controls
Multi-Function Display
Engine Error Codes
The error screen displays only when the CHECK
ENGINE light is on or when it goes on and off
during one ignition cycle. Error codes are not
stored. When the key is turned OFF, the code and
message is lost, but will reappear if the fault reoc-
curs after restarting the engine.
If the CHECK ENGINE indicator lamp illumi-
nates, retrieve the error codes from the display.
1. If the error codes are not displayed, use the
mode button to toggle until "Err" displays in
the clock area.
2. Record the three code numbers displayed in
the gear position, temperature and odometer
displays.
3. See an authorized VICTORY dealer for code details and diagnosis.
Display Units (Standard/Metric)
The display can be changed to display either standard or metric units of measurement.
Tip:
To exit the set-up mode at any time, wait 10 seconds.The display automatically exits and returns to
the odometer display.
Display Units (Standard/Metric)
1. Turn the key to the OFF position.
2. Press and
hold
the mode button while turning the key to the ON or ACC position.
3. When the display flashes the distance setting, tap the mode button to advance to the
desired setting.
4. Press and
hold
the mode button to save the setting and advance to the next display
option.
5. Repeat the procedure to change remaining display settings.
Standard Display
Metric Display
Distance
Miles
Kilometers
Fuel
U.S. Gallons
I = Imperial Gallons
Liter = Liters
Temperature
Fahrenheit
Celsius
Time
12-Hour Clock
24-Hour Clock
Avg
C
F
8
88
1
88
:
88
8
.
8
8
:
88
:
8
Speed Range
Inst
Time
TRIP 1
TRIP 2
km / h
miles / gal
“Err”
Suspect Parameter Number (SPN)
Error Code
Number (0-9)
Failure Mode
Indicator (FMI)
