Victoria VITTORIA 8, Instruction Manual

Page: 3 / 24

03.2021 INSTRUCTION MANUAL for installation and operation of pellet stove VITTORIA 8
3
1. Introduction.
We congratulate you on the excellent choice!
Do not leave this instruction manual unread. Installation and operation of a pellet stove associated with various legal
obligations, which are explained in this instruction manual. According to the laws and regulations for safe use of
appliances of this class, the purchaser and user of the pellet stove undertake using this instruction manual to inform
themselves for the assembling and the right operation of the appliance.
This instruction manual is provided to assist you and the team that will install, put into operation and service the pellet stove.
Technicians, who will carry out the above activities to the pellet stove, must be trained and competent.
Only adult persons familiar with the instruction manual should operate pellet stove. Persons with limited physical, sensory or
mental abilities or lack of experience and knowledge do not intend pellet stove for use, unless they are instructed and
supervised in the use of the appliance by a person responsible for their safety.
The pellet stove is manufactured and tested in accordance with standards EN14785, EN60335-1, EN60335-2-102, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-4, EN61000-4-5, EN61000-4-11 and meets the approved
technical documentation
Failure to follow the instructions described in this manual can lead to damage and consequences for which the manufacturer is
not held responsible.
2. Safety information.
• Pellet stove is designed to heat air through automated burn in the combustion chamber of wood pellets with a
diameter of Ø 6 mm class A1.
• Warranty is voided by unauthorized use of combustible material.
• The risk that could arise from non-compliance of this instruction manual is - direct contact with electric parts (internal),
contact with fire or hot surfaces.
• Pellet stove is equipped with safety components that guarantee automatically locking in case of failure of any of its
components. Safety components are activated without outside interference.
• Necessary for the proper operating of the pellet stove is its proper installation in accordance with the following
instructions.
• Fire door should not be opened during operation of the pellet stove. The burning process is automated and does not
require external intervention.
• It is not allowed to burn the pellet stove if there are cracks in the glass.
• Under no circumstances there should not be allowed penetration of foreign substances in the firebox or hopper.
• Do not use combustible materials to clean soot in the chimney.
• Turn off the pellet stove from the electric supply before cleaning or servicing.
• Use a vacuum cleaner to clean the combustion chamber and pellet fuel hopper only when pellet stove is cold.
• Do not use water to clean the internal parts of the pellet stove.
• ATTENTION! During operation of the pellet stove there must not be allowed for a child to touch its surface, as it is hot.
Danger of burning!
• The handle of the pellet stove warms as much as the front panel, so it must be operated with a heat-resistant glove.
•
During operation of the pellet stove flue pipes and fire door are hot.
• Do not place flammable objects and liquids close to the pellet stove.
• NEVER use flammable liquids to ignite and burn the pellet stove.
• Do not obstruct fresh air to enter the room where pellet stove is installed and through the holes on the pellet stove.
• Do not soak pellet stove and do not touch electrical components with wet hands.
• Do not mount any adapters to flue pipes and chimney.
• To operate properly and safely, pellet stove should be installed in a room that is fire-resistant and equipped with
everything needed (electricity, air exchange, vents).
• The temperature of the room where the pellet stove is installed must not be lower than 0˚C.
• Rating label is placed on the back of the pellet stove.
• Keep the instruction manual, warranty card and purchase invoice in good condition, as will be necessary in any
inquiries.
After extinction, do not burn the pellet stove again before cleaning the combustion chamber!
Removed pellets from the combustion chamber should not be placed back in the pellet fuel hopper!