www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부 또는 일부를 이용하려면,
반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
maybe over-range.
2
．
Shielding cable be recommended when measuring
small signal under noisy condition.
3
．
Be careful when measuring high volt circuit.
4
．
Do not input a voltage over DC 250V or AC peak
factor to avoid damage to the meter.
4-11.CONDUCTANCE MEASUREMENT
1.Apply the red test lead to “mA” terminal
，
and the
black one to “COM” terminal.
2. Set the range knob to “nS” , connect the test leads
with the diode under measured
NOTE:
1. The LCD display “000.0” when open circuit .
2. If the reading of the conductance is over 100nS,pls
