www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부 또는 일부를 이용하려면,
반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
resistance measuring.
2. When input terminal is open-circuit, overload
displays.
3. Before measuring in-line resistance, be sure that
power is off and all capacitance are released.
4. Do not input voltage at this range.
4-7
．
Capacitance measurement
1. Apply the black test lead to “COM” terminal
，
and the
red one to “mA” terminal.
2.Set the knob to proper capacitance range, and insert
the capacitor under tested.
NOTE:
1. If the capacitance is unknown beforehand, should set
the range knob to the highest, then, switch it to a
