www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부 또는 일부를 이용하려면,
반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
the red one to “V/Ω/Hz” terminal.
4-3-2. Set the range knob to a proper ACV range, then,
connect the test leads crossly with the measured
circuit.
NOTE:
1. If the range under measured is unclear beforehand,
should set the range knob to the highest range, then,
switch it to a proper range according to displaying
value.
．
If LCD displays “OL”, it means over-range,
should set the range knob to a higher range.
2. The remained digits do not affect the measuring
accuracy.
3. Do not input a voltage over 750V, or, the meter might
be damaged.
4. Be careful when measuring high voltage circuit.
