Viconics VT8300 Series Application Manual Download Page 76

Page: 76 / 98

Viconics Technologies Inc.

www.viconics.com

[email protected]

028-0444-06

November 2018

Options

•

Wireless adapter modules are available. (see Appendix B for network wiring).

•

Remote wall mount or duct sensor ready.

•

Can be configured for 2-pipe systems.

•

Can be configured to single or two speed fan.

•

3 universal inputs can be used and configured for advanced functionality as required by the application.

ECM Fan Operation

System Off

UO12 = 0Vdc and BO4 (fan start) is not energized

System On: (Fan modes)

•

Low: UO12 = 2.2 Vdc (adjustable from configuration menu) and BO4 “fan start” is energized.

•

Med: UO12 = 6.0 Vdc (adjustable from configuration menu) and BO4 “fan start” is energized.

•

High: UO12 = 8.6 Vdc (adjustable from configuration menu) and BO4 “fan start” is energized.

•

Auto: When there is no demand, UO12 = 0 Vdc and BO4 “fan start”is not energized. On demand, system will modulate from “low”
to “high” voltages (adjustable from configuration menu) and BO4 “fan start” is energized.

Summary of Contents for VT8300 Series



































































































Search results

Summary of Contents for VT8300 Series

Reviews:

Related manuals for VT8300 Series

Brands by name

Popular brands

Viconics VT8300 Series, Application Manual

Search results

Summary of Contents for VT8300 Series

Reviews:

Related manuals for VT8300 Series

Brands by name

Popular brands