Viconics VT8300 Series Application Manual Download Page 48

Page: 48 / 98

Viconics Technologies Inc.

www.viconics.com

[email protected]

028-0444-06

November 2018

3 speed Fan Operation

System Off

BO2, BO3 and BO4 are not energized

System On: (Fan modes)

•

BO2 is energized.

•

BO3 is energized

•

BO4 is energized.

•

Auto: When there is no demand, BO2, BO3 and BO4 are not energized. On demand, system will automatically switch “On” low
(BO2), medium (BO3) or high (B04) speed.

Options

•

Wireless adapter modules for BACnet models are available. (see Appendix B for network wiring).

•

Remote wall mount or duct sensor ready.

•

Can be configured for 2-pipe systems with changeover.

•

3 universal inputs can be used and configured for advanced functionality as required by the application.

•

Universal input can be configured for changeover sensor.

Summary of Contents for VT8300 Series



































































































Search results

Summary of Contents for VT8300 Series

Reviews:

Related manuals for VT8300 Series

Brands by name

Popular brands

Viconics VT8300 Series, Application Manual

Search results

Summary of Contents for VT8300 Series

Reviews:

Related manuals for VT8300 Series

Brands by name

Popular brands