background image

XX023-00-01 Rev 204 V9312H 

Technical Information  

  7 

Maximum Camera/ 
Lens Dimensions: 

Fits camera/lens combinations of up to 9 in. (229 mm) long, 3.5 in. (89 mm) wide, 
and 3.0 in. (76 mm) high. 
 

Weight:  

V9312H: 3.1 lb (1.4 kg). 

 

 

 

V9312H-HS-24: 4.1 lb (1.9 kg). 

 

Construction:  

Housing: aluminum, painted light gray. 

 

 

 

Window: 0.125 in. (3.2 mm) thick Lexan polycarbonate. 

 

Clear Window Area:

  2.75 in. (W) x 2.6 in. (H) (70 x 66 mm). 

 

Cable Access:

  

Two liquid tight fittings located at bottom of rear base, one compression fitting and 
one conduit fitting. 

 

Camera Access:

 

One lockable latch on back of housing; spring hinge cover. 

 
Camera Mounting: 

Three slots in camera tray. 

 
Housing Mounting: 

Three 1/4-20 tapped holes provided on bottom for mounting and balancing 
(two screws must be used).  

 

ENVIRONMENTAL

 

 

Operating Temperature 
Range:

  

 

V9312H-HS-24: -30 to 120° F (-34 to 49° C). 

 

Moisture:

 

 

Rainproof elastomer seals and gaskets. 

 

Wind Resistance: 

Up to 80 mph. 

 

NEMA Standard*: 

4. (Based on engineering evaluation and test. Not tested independently.) 

 

CE Standard*:   

IP65. (Based on engineering evaluation and test. Not tested 
independently.) 

 
 
*With all mounting holes closed off and both fittings used. 

Summary of Contents for V9312H Series
















Reviews: