19
4.
Move the camera until the enlarged image of the boundary point
is displayed in the screen center.
5.
Enter the appropriate code commands to set the boundary.
If the DISPLAY option has been set "ON" in the SECTOR SET
menu, overlay texts indicating sector number and title description
will be displayed as long as the camera view stays in the sector.
TITLE CLEAR
Function:
Clear the selected or all of the sector titles.
Option:
001~016 – Clear the selected sector title.
ALL – clear all the sector title.
INCREASE ANGLE
Function:
Configure the angle of the pan travel for the dome.
Option:
0 ~ -5° options.
4.6.4 COMPASS SET
Function:
Enable/disable the display of lens direction and angle.
Option: OFF
– Disable the direction and angle display
(default).
ON
– Display the lens direction and angle in real-time
When the COMPASS DISP is set to “ON”, the COMPASS SET
menu is shown as below.
SET THE NORTH
Operation:
Set “COMPASS DISP” to “ON,” deflect cursor to
“SET THE NORTH” and then move the cursor right and left to set
the North point. Move cursor downward to “SAVE PARA” and
click “YES” to default the current lens orientation as the North
point. Move cursor downward to click “RETURN” to save the
current North point setting. Select “NO” in “SAVE PARA” if this
setting should not be saved.
4.6.5 SYNC SET
SYNC SET
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
LINE LOCK :
OFF
PHASE ADJUST :
RETURN
EXIT
001
LINE LOCK
Function: Enable/disable the Line Lock function.
Option: OFF/ON
Normally this should be left in the OFF position (Default)
when the line sync is locked internally by the Dome. If this
is not suitable for your application you can manually adjust the
line phase by turning the Line lock ON. Some settings may
result in a disturbed picture.
AREA NO : 005
Gate 10
