Vicon Surveyor MKII, User Programming Manual

Page: 11 / 30

8
4.4 COMPASS DISPLAY

Enable/disable Compass display

Set Title position
4.5 SYNC SET

Enable/disable Compass display

Set Title position
4.6 MOTION CONTROL

Preset number

Detect set
4.7 RELAY DRIVER

Power On State

Output Type (Latching/Momentary)

State Display

Title Position (Row/Col)
Each sub-menu contains RETURN and EXIT. Selecting RETURN
returns to the level above; select EXIT to exit the menu system.
4.3 SYSTEM-INFO SET
The SYS-INFO SET menu is generally used to display the current
serial number (S/N) and camera ID number of the dome, enable
the users to select the baud rate, and to display the software
version. Additionally, Date and Time, DST settings, dome title set,
factory default and remote restart functions are in this menu.
4.3.1 SYSTEM SET
This menu is used to display the current serial number and the
camera ID of the dome.
SYSTEM SET
＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝
CURRENT S/N 11111111111
MODEL:
SV36S
CAM ADDR
001
BROAD ID:
V-I-D-P
PROTOCOL:
2400
COMM MODE
LENS TYPE:
VERSION: V1.00.05
BAUD RATE :
485
RETURN
:
:
:
255
EXIT
P236B
CURRENT S/N
Function:
Display the current serial number of the domes.
MODEL
Function:
Display the model name.
CAM ADDR
Function:
Display the current address of the dome.
Note: The camera ID number can be selected via the DIP switch.
For details on DIP switch settings, refer to Installation Guide .
When the camera ID is set via software, users can set the camera
ID on this menu.
BROAD ID
Function:
Display the camera broad ID.
In both hard and soft address, the dome can be controlled by the
broad ID. Users can use the function when the dome address is
forgotten.
COMM MODE
Function:
Display the dome communication mode. This can be
set to RS-422 or RS-485 to match the control system.
BAUD RATE
Function:
2400 bps, 4800 bps, 9600 bps and 19200 bps available.
Note: When the baud rate is set manually via the DIP switch, the
menu only displays the set baud rate and the displayed value can
not be changed. The baud rate must match the control system.
LENS TYPE
Function:
Display the camera lens type.
VERSION
Function:
Display the software version number of the current
dome.