16
4.6.1 MASK SET
MASK SET
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
PRIVACY MASK MODE 1
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
PRIVACY MASK :
OFF
MASK NO.:
001
OFF
RETURN
EXIT
PRIVACY MASK MODE 2
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
PRIVACY MASK: OFF
MASK COLOR:
BLACK
MASK NO.:
001
OFF
SET MASK
RETURN
EXIT
PRIVACY MASK MODE 1
PRIVACY MASK MODE 2
RETURN
EXIT
MASK STATUS:
MASK STATUS:
Function:
“MASK SET” is used when some specific areas need
to be covered and avoid being seen by operators. The system will
cover those areas by displaying blank screen, and operators are
unable to see those areas on the monitor. The covered areas
maintain in position with the movement of lens or zoom
operations, so the areas will always be screened.
Move the cursor to MASK SET and deflect the joystick rightward;
the following information will be displayed:
MASK SET
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
PRIVACY MASK MODE 1
PRIVACY MASK MODE 2
RETURN
EXIT
Enter PRIVACY MASK MODE 1 and the following information
will be displayed:
PRIVACY MASK MODE 1
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
PRIVACY MASK :
OFF
MASK NO.:
001
OFF
RETURN
EXIT
MASK STATUS:
PRIVACY MASK
Function:
Turn on/off Privacy Mask function.
Options
：
OFF –
Enable the Privacy Mask function (default).
ON –
Disable the Privacy Mask function.
MASK NO.
Function:
Selected the area to be masked.
Options:
001
~016 options.
MASK STATUS
Function:
Enable/disable the privacy mask function of the area.
Options: OFF
– Display the area (default).
ON
– Mask the area.
Notes:
1.
The area in the Privacy Mask menu is defined by the Area
Set menu, so be sure to set the range and serial number of the
mask areas before the Privacy Mask function is set.
2.
The two Privacy Mask modes are independent and can not be
enabled at the same time.
Enter PRIVACY MASK MODE 2.
PRIVACY MASK MODE 2
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
PRIVACY MASK: OFF
MASK COLOR:
BLACK
MASK NO.:
001
OFF
SET MASK
RETURN
EXIT
MASK STATUS:
Function:
Up to 24 privacy zones can be set.
PRIVACY MASK
Function:
Turn on/off Privacy Mask function.
Options
：
OFF -
Enable Privacy Mask function (default).
ON -
Disable Privacy Mask function.
MASK COLOR
Function:
Select the color for the private areas. The color
changes with the numbers.
Options:
Black, magenta, yellow, cyan, blue, green, white, red,
gray 6, gray 5, gray 4, gray 3, gray 2, gray 1.
Default: black.
SET MASK
Function:
Set width and height of the selected privacy mask area.
1. Enter the SET MASK menu; the central line turned on. Deflect
the joystick to the desired position to set it as the center. Press
“AUX1” to save the setting.
2. Set the width and height of the mask area by deflecting the
joystick.
