Vicon RV 1601, Operation Manual

Page: 75 / 108

Chapter 10
G0201WAD3EN 73
net wrap
10.9.3 Net roll diameter setting
An incorrect adjustment of the net roll diameter tension
characteristics may cause net rupture. The type of net used
also must be taken into account. Adjacent figure shows
standard setting
The tension character of the net can be adjusted through
spring.
1
Set spring upward when the net breaks with decreas-
ing net roll diameter.
2
Set spring downward when net breaks at new net roll
or when net tension is decreasing with decreasing net
roll diameter.
10.9.4 Sensors
Sensor distance of actuator brake position: 4 mm (5/32") .
Sensor distance of net metering roller: 4 mm (5/32") .
10.9.5 Net clamping plate
In hold position the knife must rest against the plate below
(1). Therefore the net does not fall off the pressure plate, the
net is held in the right position by the knife.
W
A0068
20 mm
H
I
2
(x)
W
A9967A
4 mm
W
A9967B
4 mm
W
A0019
1