Vicon RV 1601, Operation Manual

Page: 71 / 108

Chapter 10
G0201WAD3EN 69
net wrap
8
Move lever (1) down, now the net roll holder rotates
outward at the lh side (release by ring bolt).
9
Rotate the disc of the holder a couple of turns ccw.
Now a present net roll lies free in the holder.
10
Take holder (2) with roll out of the machine.
Attention:
Take into account the correct roll-off direction of the
net!
11
Slide holder into the new net roll.
12
Position the holder with the roll back into the machine,
ensuring the holder end is placed correctly at the brake
side.
10.6.2 Loading a net roll into the baler - AUTO-
FORM
1
Shut down tractor engine.
2
Remove ignition key.
3
Set main switch (16) of control box to 1 (ON).
4
Select net wrap push button (if still required).
5
Select manual mode by pushing button .
6
Push button and hold this for some seconds in order
to allow the actuator to extend.
7
Shut down the system by pushing button .
DANGER
Always push in order to interrupt the automatic
cycle!
W
A9965
1 2
W
A0031
1
W
A0032
16
W
A9921