Vicon RV 1601, Operation Manual

Page: 26 / 108

Chapter 5
G0201WAD3EN 24
electronic control system INFOBALE
5.1 Electronic control box
Attention:
Always protect the control box against humidity and
mechanical damages!
When the control box is switched on a beep sounds
and the control LED (5) illuminates!
5.1.1 Control elements and their function
1
Main switch with the positions:
0 = OFF
I = ON
II = emergency switch control
2
Toggle switch:
top setting = twine tie
lower setting = net wrap
3
Switch for manual wrapping initiation or to restart a
wrapping cycle
4
Light signal
5
LED: control box ready for use
6
Control cable
7
Toggle switch:
lower setting = manual wrapping
top setting = automatic wrapping
8
Three-position toggle button for emergency wrap con-
trol (twine or net)
9
LED: tailgate monitoring
10
Sound signal
5.1.2 Control elements and their function
With toggle switch (7) of the control box the manual or
automatic wrapping mode is selected.
As soon as the filling of the bale reaches 90% two short
beeps are emitted. In automatic mode wrapping starts
when the pre-set diameter has been reached. Three short
beeps are emitted six times and flashing on of the LED (5)
indicate the wrapping has started. In manual mode the
wrapping is started upon pressing button (3).
When the wrapping is ready the buzzer sounds for three
seconds.
7 9
3
4
5
6
W
A0216
START BINDING
POWER
2 1
8
10
1
WG0019
I 0 II