Vicon NOVA V1400, Programming Manual

Page: 25 / 91

XX009 Rev 1099 NOVA V1400 Administration
•
13
Program Triggered Events
If you have not enabled at least one triggered event, the following screen will display. Press Enter and enter
“1” to enter the appropriate screen. Enable the inputs which will be used to trigger events, as required by your
system.
After enabling triggered events as discussed in the previous section, they must be defined by type and
identified by receiver or monitor number.
Menu Path: Main Menu
→
Administration
→
Set Triggered Events
→
Program Trgr Events
Input Number
The X-IA input numbers available for this menu item are the inputs which were enabled as discussed in Select
Triggered Inputs on page 12. The event type and other items must be defined for each X-IA input number.
Settings: 0001 to 0512 (only X-IA inputs which are enabled as triggered events are available)
Keys: Numeric keypad’s + (plus) key or - (minus) key
Event Type
Tours, salvos and presets define video switching functions and are available as triggered event types. The
Tour setting is used to select a video switching function defined as a series of preset video displays from
various camera stations on a specified monitor or on various monitors, depending upon the tour type. The tour
type may be monitor or salvo, as discussed in
Select Tour Type
on page 50. A group of monitors displaying
video from predefined camera stations may be defined as a Salvo. The Preset setting specifies the pan, tilt,
lens preset position and settings to be recalled when the event is triggered.