Vicon NOVA V1400, Programming Manual

Page: 19 / 91

XX009 Rev 1099 NOVA V1400 Administration
•
7
Administrative User
The passcode, auto logoff and auto logoff dwell are defined for each user specified as an administrator in
Privilege on page 6.
Settings: 01 to 64 (only the numbers for those users defined to be administrators will be available)
Keys: Numeric keypad’s + (plus) key or - (minus) key
Passcode
As discussed in
Login ID
on page 6, a login ID must be entered each time the control system is accessed. If
the user has administrator privilege, a passcode must also be entered. The passcode is used to provide a
second level of access security to the programming menus and must be 10 digits or less.
Settings: 10-digit number
Keys: Number keys across the top
Default: 0000000000
Auto Logoff
This setting is used to automatically log an administrator off of the control system if operations cease for the
amount of time specified in
Logoff Dwell .
Settings: Enabled
Disabled
Keys: F1
Default: Disabled
Logoff Dwell
If Auto Logoff was enabled, the Logoff Dwell time and units must be specified. If no communications take
place between the programming keyboard and the control system for the period of time specified in Logoff
Dwell, the administrator will be automatically logged off. This does not refer to remote keypads.
Setting: 00 to 60 minutes
00 to 60 seconds
Keys: F2 to increment time
F3 to decrement time
Shift and F2 to toggle units
Shift and F3 to toggle units
Default: 5 seconds
Configure Host Port
The host port is typically connected to a personal computer (PC) known as the “host computer”. The PC may
be used to send command codes to the control system, as discussed in
NOVA V1400 Host Computer
Interface Software Instruction Manual XX010 . Using the host port provides you with an additional method of
controlling your CCTV equipment and is jack J7 on the V1400X-SV-M System Supervisor board. Unless the
PC software automatically detects the control system’s communication settings, the PC’s communication
settings must be defined. The host computer and control system settings must agree.
Menu Path: Main Menu
→
Administration
→
Configure Host Port