Vicon NOVA V1400, Programming Manual

Page: 69 / 91

XX009 Rev 1099 NOVA V1400 Video Switch Action
•
57
Action
Upon system startup, monitors may be set to display no video (Blank), display the video from a specified
camera station (Camera), begin a tour (Tour), or display the video from the camera station as defined in a
salvo (Salvo).
Note: The Salvo action applies only to the monitor specified at the top of this screen.
Settings: Camera
Blank
Tour
Salvo
Keys: Numeric keypad’s + (plus) key or - (minus) key
Default: Blank
Select Number
If the Action setting is Blank, the Select Number and Home Recall settings will not display. For other settings,
select the number of the camera, tour, or salvo to be selected upon system startup.
Settings: 0001 to 2048
Keys: Numeric keypad’s + (plus) key or - (minus) key
Shift and numeric keypad’s + (plus) or - (minus) key to increase camera number by 100
Home Recall
Camera stations may be directed to the home position when the control system is powered or rebooted by
enabling the home recall function in this screen. The home position is preset position 01 for all camera
stations. Note that this setting is only onscreen if Action is set to Camera.
Settings: Disabled
Enabled
Keys: Numeric keypad’s + (plus) key or - (minus) key
Set Camera Partition
The procedure of assigning cameras to monitors is known as partitioning. By default, all cameras are
assigned to all monitors. Video from camera stations may not be displayed on monitors unless the camera
stations are partitioned to those monitors. Monitors are partitioned to keypads as discussed in
Set Keypad
Partitions on page 18. Keypads may only control a camera station if it has been partitioned to a monitor which
was in turn partitioned to that keypad.
Menu Path: Main Menu
→
Video Switch Action
→
Set Camera Partition