XX009 Rev 1099 NOVA V1400
Video Switch Action
•
49
Monitor Number
The Monitor Number setting is used to specify which monitor’s fade options will be enabled using this screen.
Settings:
001 to 128
Keys:
Numeric keypad’s + (plus) key or - (minus) key
Camera/Alarm Fade
Press the F1 key to enable or disable the camera and alarm titles to fade from the selected monitor’s screen
after the fade time elapses.
Settings:
Enabled
Disabled
Keys:
F1
Preset Fade
Press the F2 key to enable or disable the preset title to fade from the selected monitor’s screen after the fade
time elapses.
Settings:
Enabled
Disabled
Keys:
F2
Fade Time
Use the programming keyboard to enter the fade time. The fade time may be 00 to 99 seconds. The same
fade time applies to the camera, alarm, and preset titles if they are enabled.
Settings:
00 to 99 seconds
Keys:
Number keys across the top
Video Switch Action
The Video Switch Menus are used to define tours and salvos, assign dial-up numbers and default call-up
actions, and define camera-to-monitor partitioning. Although tours and salvos may be specified as settings in
other menus, they must be defined in the submenus of the Video Switch Menus before any tour or salvo
actions may take place. Dial-up numbers are used to customize tour, salvo, and camera numbers for optimal
convenience. The default call-up specifies the condition of each monitor when power is applied. Camera-to-
monitor partitioning defines the cameras which may be viewed on specific monitors in the system.
Menu Path: Main Menu
→
Video Switch Action
Summary of Contents for NOVA V1400
