Vicon NOVA Powerplus VP3466 Programming Manual Download Page 63

Page: 63 / 101

Preset

Sector

The Powerplus allows either preset or sector titles, but not both. The Preset -or- Sector Title Edit Enable

screen shown below is used to specify whether the configuration file will contain preset titles or sector titles.

The wording of the third menu item on the Display Titling screen reflects the choice made in this screen; if

“Edit Preset Titles Fixed Sector Display” is chosen, preset titles will be available. In a similar manner, if “Edit
Sector Titles Fixed Preset Display” is chosen, sector titles will be available.

-OR- SEC

TITLE EDIT ENABLE

- - - - - - - - - - - - - - - -

1) EDIT PRESET TITLES

FIXED SECTOR DISPLAY

2) EDIT SECTOR TITLES

FIXED PRESET DISPLAY

ENTER SELECTION

ESC PREVIOUS MENU

Edit Preset Titles Fixed Sector Display

Select

to choose preset titles. Sector titles will not be available. Press Enter to return to the Display Titling

screen.

Edit Sector Titles Fixed Preset Display

Select “2” to choose sector titles. Preset titles will not be available. Press Enter to return to the Display Titling
screen.

Time/Date Controls

The Time/Date Controls selection from the Display Titling Menu is used to perform the following functions:

1 .

Set the time and date.

2 .

Define the display format of the time and date.

3 .

Set the AM/PM indicator for

time format,

Valid time and date formats are shown below.

X897 Rev

1196

Nova Powerplus

Summary of Contents for NOVA Powerplus VP3466






































































































Search results

Summary of Contents for NOVA Powerplus VP3466

Reviews:

Related manuals for NOVA Powerplus VP3466

Brands by name

Popular brands

Vicon NOVA Powerplus VP3466, Programming Manual

Search results

Summary of Contents for NOVA Powerplus VP3466

Reviews:

Related manuals for NOVA Powerplus VP3466

Brands by name

Popular brands