XX087-02 Rev 503 V1500
V1500CDU Communication Distribution Unit
•
21
Figure 14 - Inserting the Hot Standby Power Module
3. Locate the accessory kit (part number 1306-3045-00-00). The contents of the kit are listed below.
Table 11 - Contents of Accessory Kit 1306-3045-00-00
Item
Qty
Vicon Part Number
Screws, 6-32 x 3/8
2
8003-8161-00
Lock washers
2
8005-6110-00
Flat washers
2
8005-6143-00
4. Remove the lock washer, which is the smaller of the two types of washers, and thread it onto the screw.
5. Place the flat washer behind the lock washer and use a Phillips head screwdriver to attach the power
module to one of the threaded PEM stops.
6. Repeat the previous two steps for the second screw and washers.
7. Close and secure the front panel of the card cage. The light shown in Figure 15 for the second power
supply will illuminate upon insertion to indicate proper operation.
POWER
1
2
Figure 15 - Location of Hot Standby Power Module LED
Hot Standby Power
Module LED
Summary of Contents for NOVA 1500
Page 2: ...This page is a placeholder...
