Vicon KRX-3, Installation & Operation Manual

Page: 36 / 38

28
•
Chapter 11 – Technical Information XX184-00-00 KRX-3 Video Decoder
Chapter 11 – Technical Information
Table 11-1: Technical Information
Input Voltage
24 VAC ±20%, 50/60 Hz nominal
NOTE:
Vicon recommends the use of uninterruptible power supply systems (UPS) to prevent
voltage fluctuations that can affect operation and cause damage to the equipment.
Current
740 mA max. @ 24 VAC; PoE:
256
mA
typical
@ 48 VDC
Power Consumption
Less than 13 W
Heat Equivalent
0.4 btu/min (0.1 kg-cal/min)
NOTE:
These figures represent the conversion of 100% of the electrical energy to heat. Actual
percentage of the heat generated will be less and will vary from product to product. These
figures are provided as an aid in determining the extent of cooling required for an installation.
Radio-Frequency
Emission Standard
FCC Class A
Indicators and
Connectors Front Panel:
Power/Status Indicator:
Blue LED
Video Indicator:
3 bi-color LEDs
Rear Panel:
Power Connector:
2-pin terminal block
Network/POE:
RJ-45 jack
Network Connectivity:
Green LED
Network Activity:
Amber LED
Alarm:
5-pin terminal block. (Future use)
RS-232:
5-pin terminal block
RS422/485:
5-pin terminal block, green LED indicator. (Future use)
Audio:
Audio jacks I/O (Future use)
Channel 1 Video Out:
mini-D-sub, BNC-F, S-Video
Channel 2 Video Out:
mini-D-sub, BNC-F, S-Video
Channel 3 Video Out:
BNC-F
Mounting
Desk-top; rack-mount or wall-mount with optional mounting kits
Dimensions Height:
1.7 in. (42 mm),
Width:
8.5 in. (216 mm),
Depth:
6.0 in. (153 mm)
Weight
2.25 lb (1.0 kg)
Operating
Temperature Range
32 to 104° F (0 to +40° C)
Humidity
Up to 90% relative, noncondensing
LAN Interface
100 Mbps, TCP/IP Unicast
Number of Video
Outputs
3
Video Transmission
Rate
Up to 90 fps (75 fps, PAL) over 3 channels, up to 30 fps each channel (25 fps each, PAL)
Audio
2 line-level audio input/output jacks (Future use)
Video Bandwidth
1.5 Mbps (per video stream) typical depending upon environment