4
•
Chapter 3 - Installation
XX184-00-00 KRX-3 Video Decoder
Chapter 3 - Installation
For first-time installers, these steps provide the most thorough and accurate instructions.
About This Chapter
This chapter details the complete installation of the KRX-3 Video Decoder. The following sections provide
information as follows:
Unpacking the KRX-3
defines how to remove the unit and accessories from the box.
Required Items for Installation
defines items needed for installation.
Unit Components
defines all connections on the front panel and their use.
Mounting
defines all methods of securing the server for permanent use.
Installing the KRX-3
describes how to install all necessary peripheral devices directly to the server.
Unpacking the Server
Carefully open the carton. Remove the accessory kit and the KRX-3 from the box and place them on a large,
flat working surface. Open the accessory kit and verify the contents against the list in Table 1-1.
Required Items for Installation
To properly install the server there must be simple hand tools available such as a screwdriver, wrenches,
pliers and wire cutters/strippers. To set up the server for operation, there must be a PC computer running the
ViconNet (VN) Setup software.
Summary of Contents for KRX-3
Page 2: ......
Page 18: ...10 Chapter 4 Operation XX184 00 00 KRX 3 Video Decoder ...
