Vicon KRX-3 Installation & Operation Manual Download Page 11 | Manualshive

Page: 11 / 38

background image

XX184-00-00 KRX-3 Video Decoder

Chapter 2 – Quick Installation

•

3

Chapter 2 – Quick Installation

Figure 2-1: KRX-3 Quick Installation

1. Unpack the server, and accessories, from its box. Verify that hand tools and a suitable Netswitch/

Kollector/ViconNet NVR are available for connection.

2. Perform physical installation (to a desktop, wall, or rack) using the optional mounting kits, if required.

3. Make all connections to monitors, LAN, and power.

NOTE: The KRX-3 maybe powered by PoE using the LAN connection or with 24 VAC. Recommended 24

VAC power supply models are the S24WPS-1 for 120VAC installations and S24PS-230 for 230 VAC
installations or latest equivalents.

4. Power on the server. Run the provided ViconNet CD and choose software

→

KRX-3 setup to

configure the correct IP address, using the provided MAC address. (See your System Administrator
for assistance in IP addressing.)

5. Run the ViconNet Virtual Matrix Controller (VMC) application and verify that the KRX-3 displays on

the monitor layout setup list.

«
...
9
10
11
12
13
...
»

Summary of Contents for KRX-3







































Reviews:

No comments

Related manuals for KRX-3

Brand: Samsung Pages: 32

Brand: Samsung Pages: 32

Brand: Daewoo Pages: 39

Brand: NAD Pages: 7

Brand: NAD Pages: 2

Brand: Laser Pages: 2

Brand: Grundig Pages: 34

Pocketdish AV402E

Brand: Dish Network Pages: 2

Brand: Laser Pages: 9

Brand: Hyundai Pages: 60

Brand: Jaguar King Pages: 54

Brand: Memorex Pages: 2

Brand: Esoteric Pages: 96

Brand: Alcorn Mcbride Pages: 56

Brand: Fiio Pages: 4

Brand: Vivax Pages: 56

Brand: Ultra Products Pages: 22

Brand: Supersonic Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands