Crate packaging
19
Fitting the front
rotary assembly
To connect the front rotary assembly to the rear rotary assembly,
proceed as follows:
Use suitable lifting gear to lift the front rotary assembly out of the
crate and place it securely on stands.
Fit the tandem axles onto the chassis.
See »Fitting the tandem axles«, page 17.
Connecting the front
rotary assembly to
the central beam
Use suitable lifting gear to bring the front rotary assembly to the
central beam.
Fit the front rotary assembly to the central beam with a pin (dia. 35)
and secure with a dowel pin.
Fit the second pin (dia. 25) onto the central beam and secure with
a washer and split pin.
Route the hydraulic hoses and cables underneath the cover.
Fasten the cover using a bolt.
Guide the hydraulic hoses and cables through the hoop.
Connect the hose lines to their correspondingly marked
connections (see hydraulic diagram).
Fit the hose retainer.
Pin, dia. 35
Pin, dia. 25
Cover
Hoop
Hose retainer
