Crate packaging
17
Fitting the tandem
axles
Tighten wheel nut only to 20 Nm.
Fit the running wheels to the tandem axle.
Fit the tandem axles onto the chassis. The front track (in relation
to the direction of travel) is wider.
Fit the holder for the optional contact rollers onto the chassis.
Fit the contact rollers onto the contact roller holder.
Stand the rear rotary assembly on the chassis.
Secure the rear rotary assembly against rolling away and place the
support on a stand.
Observe the torque setting
Observe the specified torque of 20 Nm when tightening the wheel
nut. Higher tightening torques will damage the plastic washer.
20 Nm
Plastic washer
No.
Quantity
Part
1
2
Tandem axles
2
6
Wheels
3
8
Assembly material for wheels
No.
Quantity
Part
1
4
Contact rollers [+]
2
4
Contact roller holder
3
8
Assembly material for the contact
rollers [+]
Contact roller
Tandem axle
Contact roller holder
Chassis
