Second black highlighted box.
To change dimension press “C” button on right
hand key pad to clear.
Use left hand key pad to enter correct value as a
decimal.
2.6 Press the “OK” button on the right-hand key pad to
accept the value.
Black highlight will move to the next box with ?
mark.
2.7 Measure the distance from the “M” sensor to the
movable machine front foot to the nearest
1
⁄
8
".
The line parallel to the shaft from the center of
the “M” sensor post to the center of the front
foot bolt.
2.8 Enter this dimension into the display unit.
Third black highlighted box with ? mark.
Use left hand keypad to enter the value as a
decimal.
2.9 Press the “OK” button on the right-hand key pad to
accept the value.
Black highlight will move to the next box with ?
mark.
2.10 Measure the distance from the movable front feet to
rear feet to the nearest
1
⁄
8
".
Center of bolt to center of bolt.
2.11 Enter this dimension into the display unit.
Fourth black highlighted box with ? mark.
Use left hand keypad to enter the value as a
decimal.
2.12 Press the “OK” button on the right-hand keypad to
accept the value.
Black highlight will move to the Measure icon in
the lower right corner of the display.
3. MEASURING SOFTFOOT
(SoftCheck™ Function)
Check that all foot bolts are firmly tightened.
Check that all jack bolts are backed off from all feet.
C H E C K I N G F O R S O F T F O O T
26
