From this application, previously saved files can be
viewed or deleted.
3.1 Press the down arrow to move the black highlight
to the bottom row of icons, the file cabinet will be
highlighted.
3.2 Press the “OK” button.
3.3 Press the up/down arrows to highlight the desired
file.
Saved files are listed in order of newest to oldest.
Use the left/right arrow to move black highlight
at bottom of screen over the Open File icon
to open a file or the Trash Can icon
to delete
a file.
3.4 To Open a saved file highlight the Open File icon
then press the “OK” button to open the selected
file.
3.5 Once a saved file is opened:
Use up/down arrows to view the next saved file
Use left/right, or OK button to go back to the
saved file list
Use “C” to delete a file
3.6 To Delete a saved file highlight the Delete File icon
then press the “OK” button to delete the
selected file.
Use the left/right arrow to move black highlight
over the Trash Can
Press “OK” button to delete selected file
Press “OK” again to confirm delete
OR
Press left arrow to highlight the Do Not Delete
icon
3.7 To Exit the Memory Manager
Close alignment file if open
Press left/right arrow until exit door
is
highlighted black
Press “OK”
4. TRANSFERRING DATA TO PC,
FIXTURLASER GO
Saved files in .BMP format may be transferred to a PC
via provided USB cable
The GO must be at the start screen to transfer data
4.1 Connect USB cable to GO display unit
4.2 Connect USB cable to PC
The PC will recognize the connection as an
external flash memory drive
A folder will automatically open
4.3 Cut and paste, or copy and paste desired files to PC
4.4 Unplug USB cable after files have been transferred
It is recommended that files be deleted off the
Display Unit once the files are safely transferred
to PC; this will prevent filling up the on board
memory
G O S E T T I N G S
22
