13 Use Printers
13.1
Setting up the Printer
(1) Select
[
] or [
] for [
] in Function 1.
(2) Set print functions (print control) in the balance in reference to the instruction manual for your
printer.
The factory default of our printer is manual printing (printer control).
(3) Check the baud rate and other settings of the balance and the printer.
13.2
Printing in Compliance with ISO/GLP/GMP
(1) Use CSP-160 or CSP-240 with the balance.
(2)
Check the date and time set in the balance
(Refer to Section 10: Set Date and Time in page 37).
*
The year will be printed in 4 digits.
*
Do not press any keys on the printer during printing.
13.3
Recording Calibration Results
(1) Set the Print Control of the printer to the balance side.
(2)
Check that Compliance with ISO/GLP/GMP and Output of Calibration Result are enabled in
Function 1 [
] and [
].
(3) Perform span adjustment or a span test
(Refer to Section 9: Calibrating the Balance on page 34).
Output (print) results.
* A dot [
] is displayed during output in compliance with ISO/GLP/GMP, and the balance looks
idle, but this is normal operation.
Wait until output in compliance with ISO/GLP/GMP is completed.
54
