6.5 Unit
Converting
The unit converting function multiplies the weight of a sample on the balance by a saved coefficient,
and displays the result.
1 Select the unit converting function.
Select the unit converting function in Function 1 [
].
2 Set a coefficient.
Press the Function key for a few seconds.
When the display indicates [
], release the
key.
The display blinks a coefficient. If you have set a
coefficient before, that value is displayed.
3 Enter
a weight.
Press the Zero/Tare key.
A dot [
] blinks in the right end of the display.
4 Select a number.
Every time you press the Zero/Tare key, the number
changes.
5 Select digit places to specify a coefficient.
Press the Function key, and the specified number
shifts to the left, and you can enter the next digit.
6 Save the coefficient.
Press the Set key.
The balance beeps to indicate that the coefficient was
saved, and then goes back into measurement mode.
7 Put a sample to weigh on the balance.
Example)
4700 (displayed) = 2.35 (coefficient) x 2000 g (sample)
Put a sample to weigh on the balance.
The weight of the sample is multiplied by the
coefficient, and the result is displayed.
Key released
Continuous press
⇒
⇒
⇒
〜
⇒
⇒
⇒
小数点
マイナス
Minus
●
Decimal point
#
M
#
M
#
You can use the arrow keys to enter values instead of the Zero/Tare key or the Function key
(Refer to page 24).
25
