Function Setting
-56-
Auto Backlight Off
This function automatically turns off the backlight if the balance is left untouched in measurement
mode for about three minutes
.
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting Basics (P.
16).)
Press and hold the [Function] key. After “
”
is displayed, release the finger.
2
Set the auto backlight off.
Press the [Function] key several times to select “
.”
Select “1” by pressing the [Zero/Tare] key.
3
Save the setting.
Press the [Set] key.
The balance goes back to normal display.
参 考
The auto backlight off function does not work under the following conditions:
-
Function settings are set.
-
An object is placed on the pan, and display is not stable.
Placing an object on the pan or pressing any key turns the backlight on again automatically.
Reference
