Various Measuring Methods
-24-
Setting a reference weight by entering a value
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting Basics (P.
16).)
Press and hold the [Function] key. After “
”
is displayed, release the finger.
2
Select “Percentage Weighing.”
Press the [Zero/Tare] key several times to select
“
.”
3
Save the weighing mode.
%
Press the [Set] key.
The “percent weighing” mode is set, displaying “%.
”
4
Start setting the reference weight.
<Press and hold>
Press and hold the [Function] key. After “
” is displayed, release the finger.
The previously-saved reference sample weight blinks.
5
Enter a reference weight.
Set the reference value with the following steps:
1. Press the [Zero/Tare] key.
The digit furthest to the right side of the value
blinks..
2. Select a number by pressing the [Zero/Tare]
key.
Pressing the key toggles the number between
0 and 9, and decimal point.
3. Pressing the [Function] key selects the number
and the next digit blinks.
Set the reference weight by repeating steps 2 and
3.
Pressing the [Print] key can cancel the setting.
6
Save the value.
Press the [Set] key to save the reference weight.
