2-2 Weighing by Placing a Sample in a Container (Tare)
-13-
2-2 Weighing by Placing a Sample in a Container
(Tare)
When measuring weight with the sample in a container (tare), only the sample is weighed by
subtracting the weight of the container. This is called “tare.”
1
Place the container on the pan.
.
ｇ
The weight of the container is displayed.
2
Set the tare.
.
→0
←
Net
ｇ
Press the [Zero/Tare] key.
The readout becomes zero, and “
→
0
←
” and “Net” are
displayed (tare range setting).
注 意
When “Net” is not displayed even though the
[Zero/Tare] key is pressed, zero-point adjustment
is being executed, not tare range setting.
3
Place the sample in the container.
.
Net
ｇ
The weight of only the sample is displayed.
参 考
When a tare range is set, the weighable range is reduced by the weight of the tare.
Weighable range = original weighing capacity – pan weight
Reference
Caution
