Function Setting
-52-
5-1 Using Two Expression Units by Switching Them
You can set two units
(unit A and unit B) and switch between the units.
参 考
Unit B can be used only in weighing machine mode. Unit A can be used in all measurement
modes.
For more information on selectable units, refer to “Appendix 1: Function Setting List” (P. 86).
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting Basics (P.
16).)
Press and hold the [Function] key. After “
”
is displayed, release the finger.
2
Set unit A.
Press the [Function] key several times to select “
.”
Select unit from the following numbers by pressing
the [Zero/Tare] key.
: g/
: kg/
: ct (carat), etc.
When setting only the unit A, press the [Set] key in this
step to save the setting.
3
Set unit B.
Press the [Function] key several times to select “
.”
Select unit from the following numbers by pressing
the [Zero/Tare] key.
: g/
: kg/
: ct (carat), etc.
参 考
Unit B can be used only in weighing machine mode.
4
Save the setting.
Press the [Set] key.
The balance goes back to normal display.
5
How to switch between unit A and unit B
Pressing the [Function] key during measurement
switches between unit A and unit B.
Reference
Reference
