Chapter 2
Using the Port Selection and Domain Setup Window
Using Domains
Xgig Maestro Introduction Guide
November 2015
Version 8.1
Page 23
Remove from Domain
This action is only available on Maestro ports not locked by another client application and
on TTL connectors not locked by an Xgig Analyzer. When you select this action, it removes
selected ports and TTL connectors from the domain.
To remove a port or TTL connector from a domain:
1
Select the port or TTL connector in the Chassis View.
2
Right-click on the item in the graphical display to open the menu (Figure 12).
Figure 12
Removing a Port or TTL Connector from a Domain
3
Select
Remove from Domain
.
The following warning is displayed. See Figure 13.
Figure 13
Domain Warning
4
Click
Yes
to remove the port or TTL connector.
NOTE
Removing the last port from a domain deletes that domain.
