Page 38 of 43
Step Action
Description
DTF test with PASS/FAIL indicator
5.6.5 RF Cable Loss
The following procedure describes the steps to perform cable loss tests with OneAdvisor.
Step Action
Description
1
Cable Loss measurement mode:
-
Select the desired
measurement layout.
-
Select the {Cable Loss} icon.
Note: Refer to the “Initial Setup”
section for initial configuration
and connectivity.
Cable Loss Measurement
2
Set the frequency band or range
to perform reflection test:
-
Select the frequency group of
the top-bar navigation or the
configuration icon from the
side-bar navigation
-
Set the required frequency
range by selecting, the
desired field, enter the
frequency value and select
{Apply}
Note: Frequency is set by either
{Start Frequency} and {Stop
Frequency} or by {Center
Frequency} and {Span Frequency}
Top bar frequency group Side-bar configuration icon
