Page 34 of 43
Step Action
Description
2
Set the frequency band or range
to perform reflection test:
-
Select the frequency group of
the top-bar navigation or the
configuration icon from the
side-bar navigation
-
Set the required frequency
range by selecting, the
desired field, enter the
frequency value and select
{Apply}
Note: Frequency is set by either
{Start Frequency} and {Stop
Frequency} or by {Center
Frequency} and {Span Frequency}
Top bar frequency group Side-bar configuration icon
Setting Frequency Range
3
Calibrate the instrument:
-
Select {Cal} icon from the
side-bar navigation and
follow the on-screen
instructions.
Note: If an RF extension cable is
required, connect the RF
extension cable into the CAA
Module Reflection / RF Output
port and on the other end of the
RF extension cable connect the
calibration kit.
Calibration Process