41
BIOS SETUP
•••••
RTC Alarm Resume
Select “Enabled” if you want to Power On your system at a certain time on the same day
every month or at a certain time every day.
•••••
Date/Resume Time
Set the Date and Time to Power On the system. System is activated only when the
“RTC Alarm Resume” field is “Enabled”.
•••••
IRQs Activity Monitoring
If you select “ON”, the IRQs Activity Monitoring Function will be enabled. In the screen,
you can see a list of IRQs (Interrupt Requests). When an I/O device wants to gain the
attention of the Operating System, it asserts an IRQ signal. When the Operating System
is ready to respond to the request, it interrupts itself and performs the service. The IRQs
Activity Monitoring function monitors the IRQs you select as “Enabled”. Activity from any
of them will awaken a system which has been powered down.
NOTE: This function requires a modem or an add-on LAN device, which
supports the Ring Wake-Up or Wake-on-LAN (WOL) function,
respectively.
•••••
Ring/WOL Resume
Select “Enabled” to Power On your system when the external modem receives a call or
when a LAN card receives a wake-up packet or signal.
