•
Gate A20 Option
Choose “Fast” (default) or “Normal”. “Fast” allows RAM access above 1MB to use the
fast Gate A20 line.
•
Typematic Rate Setting
When this function is “Disabled”, the following two items (Typematic Rate and Typematic
Delay) are irrelevant, and keystrokes repeat at a rate determined by the keyboard
controller in your system. When this function is “Enabled”, you can select a typematic
rate and typematic delay.
•
Typematic Rate (Chars/Sec)
When the Typematic Rate setting is enabled, you can select a typematic rate (the rate at
which characters repeat) of “6”, “8”, “10”, “12”, “15”, “20”, “24” or “30” characters per
second.
•
Typematic Delay (Msec)
When the Typematic Delay setting is “Enabled”, you can select a typematic delay (the
delay before key strokes begin to repeat) of “250”, “500”, “750” or “1000” milliseconds.
•
Security Option
If you have set a password, you can select whether the password is required while the
system boots, or only when you enter “Setup”.
•
OS Select for DRAM > 64MB
Select “OS2” only if you are running the OS/2 operating system with more than 64 MB
of RAM on your system.
•
Video BIOS Shadow
Select “Enabled” to change the video BIOS location form ROM to RAM, where the CPU
can read data through the 64-bit DRAM bus. This can enhance system performance.
•
Delay For HDD(Secs)
Default is “’0” .You may need to increase the delay time for BIOS to detect the right type
of HDD for some older HDDs.
27
BIOS SETUP
