BIOS SETUP
40
•••••
VGA
If you select “On”, you can set the VGA to wake-up the system.
•••••
LPT & COM
Any activity from LPT or COM ports can wake-up the system if selected. Selections are:
“NONE”, “LPT”, “COM” or “LPT/COM”.
•••••
HDD & FDD
If you select “On”, any activity from a HDD or FDD wakes up the system.
•••••
PCI Master
If select “On”, any activity on the PCI Master wakes up the system.
•••••
PowerOn by PCI Card
This feature supports a PCI Device, which is provided with Power Management function
to power on the system without an additional connector.
•
State After Power Failure
−−−−−
On: After a power failure, the system will automatically reboot as soon as power is
restored.
−−−−−
Off: After a power failure, the system will not reboot when power is restored. The
system needs to be turned on again manually.
−−−−−
Auto: After a power failure, the system will automatically reboot as soon as power
is restored if the PC was turned on when the power failed. If the PC was turned off
when the power failed, the system needs to be turned on again manually.
•
IRQ/Event Activity Detect
