BIOS SETUP
36
•••••
IR Transmission Delay
Consult your IR peripheral’s documentation to set this field. Options are: “Enabled” and
“Disabled”.
•••••
UR2 Duplex Mode
Consult your IR peripheral’s documentation to select the proper setting for your IR
device. Options are: “Full” and “Half”.
•••••
Use IR Pins
Consult your IR peripheral’s documentation to set this field. Options are: “RxD2, TxD2”
and “IR-Rx2Tx2”.
•••••
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer)
port. The choices are: “378/IRQ7”, “278/IRQ5”, “3BC/IRQ7” and “Disabled”.
•••••
Parallel Port Mode
This field allows you to set the operation mode of the parallel port. Selections are:
−
SPP: Allows normal-speed operation, but in one direction only.
−
EPP: Allows bidirectional parallel port operation at maximum speed.
−
ECP: Allows DMA and bidirectional operation. This is faster than EPP mode.
−
ECP + EPP: Allows normal speed operation in two-way mode.
•••••
EPP Mode Select
Select EPP port type “EPP1.7” or “EPP1.9”
•••••
ECP Mode Use DMA
Assign DMA channel “1” or “3” to the port for ECP mode operation.
•••••
Game Port Address
Assign Game Port resources. Selections are: “201”, “209”, or “Disabled”.
•••••
Midi Port Address
Assign Midi Port resources. Selections are: “330”, “300”, “290”, or “Disabled”.
•••••
Midi Port IRQ
Assign Midi Port IRQ. Selections are: “5” or “10”.
