Vezco VZ-IP-BUTIDS-WI, User Manual

Page: 86 / 124

Video Intercom Indoor Station · User Manual
78
Figure 9-8 Adding Storage Server Type
4. Click Storage Server on the list to enter the Storage Server Adding interface.
For adding the storage server, please refer to 9.2.1 Adding Video Intercom Devices , or
User Manual of VEZPRO (Video Intercom) V2.4.2 in the disk.
9.4.2 Formatting the HDDs
The HDDs of the storage server need to be formatted for the captured picture storage.
Steps:
1. Select the added storage server from the list and click Remote Config .
2. Click Storage->General to enter the HDD Formatting interface.
3. Select the HDD from the list and click Format . You can check the formatting process
from the process bar and the status of the formatted HDD changes from Unformatted
to Normal Status .