Vezco VZ-IP-BUTIDS-WI, User Manual

Page: 71 / 124

Video Intercom Indoor Station · User Manual
63

The default port No. is 8000.


After editing the local network parameters of device, you should add the devices to
the device list again.

Linked Devices Network Configuration
Purpose:
In the linked devices network configuration interface, you can configure the network
parameters of master stations, SIP servers and management centers of the same LAN.
The devices can be linked to the door station and realize the linkage between these
devices.
Steps:
1. Click the Linked Network Configuration button to enter linked network configuration
interface.
Figure 8-34 Linked Network Configuration
2. Enter the master station IP address, (main) door station IP address, SIP server IP
address, management center IP address, and doorphone IP address.
3. Select the main door station type from the drop-down list.
4. Click the Save button to enable the settings.

After adding master station IP Address, the linkage between indoor station and
master station can be realized.


After adding the door station IP Address, the video intercom between indoor stations
of same building can be realized.


After adding SIP Server Address IP, the video intercom of same community: video
intercom between indoor stations of different building, calling indoor station from
outer door station and video intercom between management center and indoors.


After adding management center IP Address, the events can be uploaded to the
management center.
