Vezco VZ-IP-BUTIDS-WI, User Manual

Page: 54 / 124

Video Intercom Indoor Station · User Manual
46
Figure 8-4 Editing Network Parameters

The default port No. is 8000.


The default IP address of the indoor station is 192.0.0.64.


After editing the network parameters of device, you should add the devices to the
device list again.


Enable DHCP, and the software can obtain network parameters for the device
automatically.

8.3 Adding Device
Before you start:
Make sure the device to be added has been activated.
Purpose:
For batch configuration tool software, you should add device to the software so as to
configure the device remotely.
The software provides 3 ways for adding the devices. You can add the active online
devices within your subnet, add devices by IP address, and add devices by IP segment.
8.3.1 Adding Online Device
Before you start:
Make sure the device to be added is in the same subnet with your computer. Otherwise,
please edit network parameters first.
Steps:
1. Select an active online device or hold the Ctrl or Shift key to select multiple devices in
the online devices list.