English - 80 -
NOTE:
If the modem supports N mode, you
should set N mode settings.
If the selected network is protected with a
password, please enter the correct key by using
the virtual keyboard. You can use this keyboard
via the directional buttons and the
OK
button
on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now
established. To disconnect from a wireless
network, highlight
Network Type
and press Left
or Right buttons to set as
Disabled
.
Highlight
Internet Speed Test
and press the
OK
button to check your internet connection
speed. Highlight
Advanced
Settings
and press
the
OK
button to open the advanced setting
menu. Use directional and numeric buttons
to set. Press the
OK
button to save settings
when complete.
Other Information
The status of the connection will be displayed as
Connected
or
Not
Connected
and
the current
IP address, if a connection is established.
Connecting to your mobile device via WiFi
•
If your mobile device has WiFi feature, you
can connect it to your TV via a router, in order
to access the content in your device. For this,
your mobile device must have an appropriate
sharing software.
•
Connect to your router following the steps
stated above in the
Wireless Connectivity
section.
•
Afterwards, engage your mobile device with the
router and then activate the sharing software on
your mobile device. Then, select files that you
want to share with your TV.
•
If the connection is established correctly, you
will be able to access the shared files from
your mobile device via the
Media Browser
of your TV.
•
Enter the
Media Browser
menu and the
playback device selection OSD will be
displayed. Select your mobile device and press
the
OK
button to continue.
•
If available, you can download a virtual
remote controller application from the server
of your mobile device application provider.
NOTE:
This feature may not be supported
on all mobile devices.
Wake ON
Wake-on-LAN (WoL) and Wake-on-Wireless
LAN (WoWLAN) are standards that allow
a device to be turned on or woken up by a
network message. The message is sent to the
device by a program executed on a remote
device connected to the same local area
network, such as a smartphone.
Your TV is WoL and WoWLAN compatible.
To enable this feature set the
Wake On
option
in the
Network/Internet Settings
menu as
On
. It is necessary that both the device, from
which the network message will be sent to the
TV, and the TV are connected to the same
network. Wake On feature is only supported
for Android OS devices and can only be used
via YouTube and Netflix applications.
In order to use this feature the TV and the
remote device should be connected at least
once while the TV is on. If the TV is powered
off, the connection should be reestablished,
the next time it is switched on. Otherwise
this feature will be unavailable. This does
not apply, when the TV is switched into the
standby mode.
Connectivity Troubleshooting
Wireless Network Not Available
•
Ensure that any firewalls of your network
allow the TV wireless connection.
