English - 69 -
Note: If you perform a First Time Installation
the TV will return to using the default logo,
if any.
(*) Images should have an aspect ratio of 16:9
and they should be in .jpg, .jpeg or .jpe file
formats. Only files with sizes no greater then
300KB are supported. The image cannot be
set as boot logo, which’s resolution doesn’t
appear on the info banner.
FollowMe TV (if available)
With your mobile device you can stream
the current broadcast from your smart TV
using the
FollowMe TV
feature. Install the
appropriate Smart Center application to your
mobile device. Start the application.
For further information on using this feature
refer to the instructions of the application
you use.
NOTE:
This application may not be compatible
with all mobile devices. HD channels are not
supported and both of the devices must be
connected to the same network.
CEC and CEC RC Passthrough
This function allows to control the CEC-
enabled devices, that are connected through
HDMI ports by using the remote control of
the TV.
The
CEC
option in the
System>Settings>More
menu should be set as
Enabled
at first. Press
the
Source
button and select the HDMI
input of the connected CEC device from
the
Sources List
menu. When new CEC
source device is connected, it will be listed in
source menu with its own name instead of the
connected HDMI ports name(such as DVD
Player, Recorder 1 etc.).
The TV remote is automatically able
to perform the main functions after the
connected HDMI source has been selected.
To terminate this operation and control
the TV via the remote again, press
Quick
Menu
button on the remote, highlight the
CEC RC Passthrough
and set as
Off
by
pressing Left or Right button. This feature
can also be enabled or disabled under the
System>Settings>More
menu.
The TV supports also ARC(Audio Return
Channel) feature. This feature is an audio
link meant to replace other cables between
the TV and the audio system (A/V receiver
or speaker system).
When ARC is active, TV does not mute its
other audio outputs automatically. So you
need to decrease TV volume to zero manually,
if you want to hear audio from connected
audio device only (same as other optical or
co-axial digital audio outputs). If you want to
change connected device’s volume level, you
should select that device from the source list.
In that case volume control keys are directed
to connected audio device.
NOTE:
ARC is supported only via the HDMI1
input.
System Audio Control
Allows an Audio Amplifier/Receiver to
be used with the TV. The volume can be
controlled using the remote control of the
TV. To activate this feature set the
Speakers
option in the
System>Settings>More
menu
as
Amplifier
. The TV speakers will be muted
and the sound of the watched source will be
provided from the connected sound system.
NOTE:
The audio device should support
System Audio Control feature and CEC
option should be set as Enabled.
