English - 67 -
lists,
the TV controls the TKGS table version
number whether it is the last version or not.
If any changes are detected, TV starts to
update. When the update is completed a
message will be displayed to inform the user
about the changes.
Manual:
An update can be started manually
any time. Press the
Menu
button. Highlight
Installation
and press
OK
. In the sub menu
highlight
TKGS Installation
and press
OK
.
Than select
Start Update
and press
OK
.
Analogue:
If
Analogue
broadcast search
option is turned on, the TV will search for
analogue broadcasts after other initial settings
are completed.
Additionally you can set a broadcast type as
your favourite one. Priority will be given to
the selected broadcast type during the search
process and the channels of it will be listed on
the top of the
Channel List
. When finished,
press
OK
to continue.
You can activate
Store Mode
option at
this point. This option will configure your
TV’s settings for store environment and
depending on the TV model being used, the
supported features of it may be displayed
on the top of the screen as an info banner.
This option is intended only for store use.
It is recommended to select
Home Mode
for home use. This option will be available in
System>Settings>More
menu and can be
turned off/on later.
Press
OK
button on the remote control to
continue and the
Network/Internet Settings
menu will be displayed, if you confirm the
previously displayed message asking whether
you want to do the network settings. Please
refer to
Connectivity
section to configure
a wired or a wireless connection. After the
settings are completed press
OK
button to
continue. To skip to the next step without
doing anything select
No
and press the
OK
button when the message is displayed asking
whether you want to do the network settings.
After the initial settings are completed TV will
start to search for available broadcasts of the
selected broadcast types.
After all the available stations are stored, scan
results will be displayed. Press
OK
to continue.
The
Edit Channel List
menu will be displayed
next. You can edit the channel list according
to your preferences or press the
Menu
button
to quit and watch TV.
While the search continues a message may
appear, asking whether you want to sort
channels according to the LCN
(*)
. Select
Yes
and press
OK
to confirm
.
(*) LCN is the Logical Channel Number
system that organizes available broadcasts
in accordance with a recognizable channel
number sequence (if available).
Note: Do not turn off the TV while initializing
first time installation. Note that, some options
may not be available depending on the country
selection.
In the TKGS system, channels can be blocked
by the service provider and Audio/Video
transmission will not be available from these
channels.
Using SatcoDX Feature
You can perform SatcoDX operations using
the
Installation>Satellite Settings
menu. In
the
SatcoDX
menu, there are two options
regarding to the SatcoDX.
You can download or upload SatcoDX data. In
order to perform these functions a USB device
must be connected to the TV.
You can upload current services and related
satellites & transponders in TV, to a USB
device.
