English - 65 -
Switching On/Off
To Switch the TV On
Connect the power cord to a power source
such as a wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode
either:
•
Press the
Standby
button,
Pro/-
or a numeric button on the remote control.
•
Press the the middle of side function switch
on the TV in.
To Switch the TV Off
Press the
Standby
button on the remote
control or press the middle of the side function
switch on the TV in and hold it down for a few
seconds, the TV will switch into standby mode.
To power down the TV completely, unplug
the power cord from the mains socket.
NOTE:
When the TV is switched into standby
mode, the standby LED can blink to indicate
that features such as Standby Search, Over
Air Download or Timer is active. The LED
can also blink when you switch on the TV from
standby mode.
First Time Installation
When turned on for the first time, the
language selection screen is displayed. Select
the desired language and press
OK
.
On the next screen, set your preferences using
the directional buttons.
NOTE:
Depending on the Country selection
you may be asked to set and confirm a PIN at
this point. The selected PIN cannot be 0000.
You have to enter it if you are asked to enter a
PIN for any menu operation later.
About Selecting Broadcast Type
Digital Aerial:
If
Digital Aerial
broadcast
search option is turned on, the TV will search
for digital terrestrial broadcasts after other
initial settings are completed.
Digital Cable:
If
Digital Cable
broadcast
search option is turned on, the TV will search
for digital cable broadcasts after other initial
settings are completed. According to your
other preferences a confirmation message
may be displayed before starting to search.
Select
YES
and press
OK
to proceed. To
cancel operation, select
NO
and press
OK
.
You can select
Network
or set values such as
Frequency
,
Network ID
and
Search Step
.
When finished, press
OK
button.
D-Smart Option
If desired, you can search and store D-Smart
cable channels. On the
Network channel
scan
screen set the
Network
option as
DSmart Auto
or
DSmart Manual
. If manual
option is selected, the other options can be
set as desired. When finished, press
OK
button.
NOTE:
Searching duration will change
depending on the selected Search Step.
Satellite:
If
Satellite
broadcast search option
is turned on, the TV will search for digital
satellite broadcasts after other initial settings
are completed. Before satellite search is
performed some settings should be made.
Tivibu Option
If desired, you can search and store Tivibu
channels. Before the satellite search starts,
a menu will be displayed where you can
select to install
Tivibu
channels. Set the
Install Type
as
Operator
and than set the
Satellite Operator
accordingly. Press
OK
to proceed. The TV will start to search for
available broadcasts.
D-Smart Option
If desired, you can search and store D-Smart
channels. Before the satellite search starts, a
