51
voltages are available. The MAX803 has an open-drain output stage, while the MAX809/MAX810 have push-pull outputs.
The MAX803’s open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than V
CC
.
The MAX803/MAX809 have an active-low RESET output, while the MAX810 has an active-high RESET output. The
reset comparator is designed to ignore fast transients on V
CC
, and the outputs are guaranteed to be in the correct logic state
for V
CC
down to 1V. Low supply current makes the MAX803/MAX809/MAX810 ideal for use in portable equipment. The
MAX803 is available in a 3-pin SC70 package, and the MAX809/MAX810 are available in 3-pin SC70 or SOT23
packages.
17.10.2. Features
•
1
Precision Monitoring of +2.5V, +3V, +3.3V, and +5V Power-Supply Voltages
•
Fully Specified Over Temperature
•
Available in Three Output Configurations
Open-Drain RESET Output (MAX803)
Push-Pull RESET Output (MAX809)
Push-Pull RESET Output (MAX810)
•
140ms min Power-On Reset Pulse Width
•
12µA Supply Current
•
Guaranteed Reset Valid to V
CC
= +1V
•
Power Supply Transient Immunity
•
No
External
Components
•
3-Pin SC70 and SOT23 Packages
17.10.3. Pin Description
17.11. TDCC2345TV39A
17.11.1. General Description
•
Receiving System : Designed to cover all bands in VHF and UHF including digital terrestrial channels for DVB-T
system.
•
Receiving Channel : 47 MHz ~ 862 MHz
•
Intermediate Frequency : Digital (center) 36.125 MHz
•
Input Impedance : 75
Ω
, Unbalanced.
•
IF Output Impedance : 75
Ω
, Balanced.
•
Loop through RF output Impedance : 75
Ω
, Unbalanced.
•
Band Change-Over System : PLL system
Summary of Contents for 17MB15E-5
