Vesta VRC-100 Installation Manual Download | Manualshive

Page: 1 / 64

background image

REVOLUTION CONDENSING

COMBI-BOILERS

Installation

Manual

Keep this manual near this boiler for future reference

whenever maintance or service is required.

READ ALL OF THE INSTRUCTIONS THOROUGHLY BEFORE OPERATING THIS BOILER.

This manual provides information on the installation of the boiler. For proper operation and safety, it is important to

follow the instructions and adhere to the safety precautions.
A licensed professional must install the boiler according to the exact instructions of the manual.

Warning

If the information in these instructions is not followed exactly, fire or explosion

may result causing property damage, personal injury, or death.

-

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.

-

What to do if you smell gas

•  Do not try to light any appliance.
•  Do not touch any electrical switch; do not use any phone in your building.
•  Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
•  If you cannot reach your gas supplier, call the fre department.

- Installation and service must be performed by a licensed professional.

The installation must conform with local codes or, in the absence of local codes, the National Fuel

Gas Code, ANSIZ223.1/NFPA 54 and/or CSA B149.1, Natural Gas and Propane Installation Code.

Model

VRC-80 VRC-100

VRC-120 VRC-140

1
2
3
...
»

Summary of Contents for VRC-100

































































Reviews:

No comments

Related manuals for VRC-100

Brand: Teba therm Pages: 12

Brand: Main Pages: 12

Brand: Magikitch'n Pages: 4

VOGUE MAX COMBI 26

Brand: Ideal Boilers Pages: 80

Brand: IDEAL Pages: 16

Brand: ideal commercial Pages: 66

BroilVection JF63 Gas

Brand: Nieco Pages: 40

PUREFIRE PFW-199

Brand: PEERLESS Pages: 81

Brand: Viessmann Pages: 32

Brand: Ferroli Pages: 28

Dunkirk DMG-240

Brand: ECR International Pages: 86

Brand: Nibe Pages: 12

Maxflow Combi FS

Brand: Baxi Pages: 48

Main Combi 25 Eco

Brand: Baxi Pages: 60

MainEco Combi 24

Brand: Baxi Pages: 80

Power HT 1.1000

Brand: Baxi Pages: 36

Nuvola 3 Comfort

Brand: Baxi Pages: 40

MINI NIKE X 24 3 E

Brand: Immergas Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands