30
■
Maintenance
Cleaning (Motor cartridge)
Ordinary, cleaning of motor cartridge is not needed. However, depending on cleanness of air, grimes
might be on inner part of motor cartridge.
To clean up motor cartridge
Use clean soft cloth or cotton buds with a few water,
absolute alcohol.
Remove motor cartridge.
Clean up the parts between metal plates on counter side of
the label (pointed by dotted line circle in the right picture).
Clean up metal plates too.
Be sure complete dry up of those liquid before assembling.
Be sure there is no fiber or other materials of cleaner.
Assemble motor cartridge (see p.28).
■
In the case of anomalies
Caution
REMEMBER
Do not put G-9 in work with conditions below.
・
Broken by falling and / or shock.
・
Loose air fitting
・
Cannot fix motor cartridge.
・
Cannot fix the regulatory.
REMEMBER
Stop air supplies in anomaly condition.
PROHIBITED
Do not disassemble this product.
Sparks from electrode
There should be no visible sparks from the static elimination device system during normal use. If you
see these kinds of sparks continuing to occur at the discharge needle, etc., make sure to perform
necessary maintenance such as cleaning the connected needle electrode. If cleaning cannot eliminate
the occurrence of sparks, stop the supply of power to the body part and contact your local dealer.
Other Anomalies
If any of the following phenomena occur, immediately stop the supply of air and contact your local
dealer.
Air leaking from body and / or air fitting.
Smoke from body and / or burn.
A strange smell is coming from the body part. Or, it is making an unusual humming sound.
(which can be heard from 1 m away)
The body part is considerably distorted. Or, it is abnormally hot. (enough that it cannot be
touched with bare hands)
Using G-9 in improper working condition may cause product damage or personal accident.
Therefore, promptly request servicing if trouble occurs. For servicing, contact the supplier.
